Challenger SRT-8 V8-6.1L (2009)
Brake Pad: Removal and Replacement
Brake Pads - Removal
SRT8
NOTE: Review all Warnings and Cautions. See: Service Precautions/Technician Safety Information
1. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
NOTE: Perform 2 through 8 on each side of vehicle to complete pad set removal.
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. Using hammer (4) and pin punch (3) on outboard end, tap lower brake pad support pin (2) out of caliper (1).