Challenger SRT-8 V8-6.1L (2009)
NOTE: Repeat above procedure to opposite brake pad (1) and pistons as necessary.
8. Support spring link (1) using a transmission jack (5) or other appropriate jack. Raise spring link just enough to access brake caliper lower
mounting bolt (4) from above compression link (2).
9. Remove the lower and upper caliper mounting bolts (1).
10. Remove brake caliper (2) with pads from knuckle and brake rotor.
11. If brake pads need to be removed from caliper.
NOTE: These calipers are not serviceable. Do not attempt disassembly.
Single Pistion
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .