Challenger SRT-8 V8-6.1L (2009)
![background image](/dodge/challenger_srt-8/v8-6.1l/Page-648001.png)
Lifter / Lash Adjuster: Service and Repair
Hydraulic Lifters - Removal
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the cylinder head See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Removal
3. Remove the tappet guide holder retaining bolt (1) from the tappet guide holder assembly (2).
CAUTION: The tappets and guide holder assembly must be installed as an assembly and in their original locations or engine damage could
result.
CAUTION: If the tappets and guide holder assembly are to be reused, identify tappets to ensure installation in their original location.
4. Remove the tappet guide holder (1) and tappets (2) as an assembly.
5. Check the camshaft lobes for abnormal wear.