Challenger SRT-8 V8-6.1L (2009)
NOTE: Do not pry on oil pan or oil pan gasket. The gasket is integral to engine windage tray and does not come out with oil pan.
NOTE: The horizontal M10 fasteners are 5 mm longer in length, and must be reinstalled in original locations.
12. Remove the M10 fasteners (vertical and horizontal) from the rear of the oil pan to the transmission.
13. Using the sequence shown, the oil pan mounting bolts and remove the oil pan.
NOTE: When the oil pan is removed a new oil pan gasket/windage tray assembly must be installed, the old gasket cannot be reused.
14. Remove and discard the integral windage tray and gasket.