Challenger SRT-8 V8-6.1L (2009)
14. To remove the air doors (1) from the air distribution housing (2), first carefully push down on the tab (3) of the air door lever (4) located in the
pivot shaft of the air door being removed.
NOTE: If the seal on the air door is deformed or damaged, the air door must be replaced.
15. Gently pull the air door lever out of the pivot shaft and remove the air door(s) from the air distribution housing as required.
Air Inlet Housing
HOUSING-AIR INLET
NOTE: The air inlet housing must be removed from HVAC housing and disassembled for service of the recirculation-air door.
1. Remove the air inlet housing (1) from the HVAC housing and place it on a workbench See: Removal and Replacement/HVAC Housing - Removal
2. Remove the three screws (2) that secure the recirculation door actuator (3) to the air inlet housing and remove the actuator.
3. Remove the recirculation-air door (4) from the air inlet housing.
HVAC Housing
HOUSING-HVAC
NOTE: The HVAC housing must be removed from the vehicle and disassembled for service of the A/C evaporator.