dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P0339 Set|Page 3514 > < A/T Controls - Harsh 4-3 Shift/Poor Shift Quality|Page 3509
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - MIL ON/DTC P0339 Set

NUMBER: 18-002-09

GROUP: Vehicle Performance

DATE: January 29, 2009

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 9.04 OR HIGHER.

StarMOBILE STANDALONE MODE OR StarMOBILE DESKTOP CLIENT MAY ALSO BE USED TO PERFORM THIS PROCEDURE.

SUBJECT:
Flash: MIL Illumination For P0339 - Crankshaft Position Sensor Intermittent

OVERVIEW:
This bulletin involves flash reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

2009

(LC)

Challenger SRT-8

NOTE:

This bulletin applies to vehicles built with a 6.1 L engine with a 6 speed manual transmission (Sales Codes ESF and DEC) built before January 19,
2009 (MDH 0119XX).

SYMPTOM/CONDITION:
Some customers may complain of a MIL illumination. Upon further investigation the Technician may find that P0339 - Crankshaft Position Sensor
Intermittent has been set.

DIAGNOSIS:
Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as
designed. If DTC's other then the one listed above are present record them on the repair order and repair as necessary before proceeding further with this
bulletin.

If the vehicle operator describes or experiences the Symptom/Condition, perform the Repair Procedure.

PARTS REQUIRED:

SPECIAL TOOLS / EQUIPMENT REQUIRED:

REPAIR PROCEDURE:

NOTE

Engine Controls - MIL ON/DTC P0339 Set|Page 3514 > < A/T Controls - Harsh 4-3 Shift/Poor Shift Quality|Page 3509