Challenger SRT-8 V8-6.1L (2009)
6. Install the two lower seat belt anchor bolts (1).
WARNING: Do not connect the battery negative cable See: Testing and Inspection/Component Tests and General Diagnostics . If the system test is
not performed first it may result in serious or fatal injury.
REAR
1. Position the retractor (4) into the vehicle by inserting the indexing tab up into the body.
2. Install the retractor mounting bolt (3). Tighten bolt to 32 Nm (24 ft. lbs.).
3. Install the upper turning loop retaining bolt (2). Tighten bolt to 40 Nm (30 ft. lbs.).