Challenger SRT-8 V8-6.1L (2009)
![background image](/dodge/challenger_srt-8/v8-6.1l/Page-175001.png)
Power Mirror Switch: Service and Repair
Power Mirror Switch - Removal
REMOVAL
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Disconnect and isolate the negative battery cable.
2. Remove the door trim panel.See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Trim Panel - Removal.
3. Using a flat-bladed tool, remove the mirror switch and twist (1) from the door trim panel.