Challenger SRT-8 V8-6.1L (2009)
Battery Cable: Service and Repair
Battery Cables - Installation
INSTALLATION
NEGATIVE - ENGINE COMPARTMENT
1. Position the battery negative cable in the engine compartment.
2. Raise the vehicle on hoist See: Maintenance/Vehicle Lifting/Service and Repair.
3. Install the fastener securing the battery negative cable to the transmission housing. Tighten the bolt to 11 Nm (8 ft. lbs.).
4. One at a time, install the battery cable retaining pushpins, fasteners and routing clips until the cable is installed exactly where it was in the vehicle.
5. Lower the vehicle.
6. Install the fastener securing the battery negative cable to the right front strut tower.
7. Connect the battery negative cable. Follow the battery connection procedure. See: Service and Repair/Procedures/Battery Reconnection
8. Install the spare tire cover.
NEGATIVE - REAR COMPARTMENT