Challenger SRT-8 V8-6.1L (2009)
Power Steering Fluid Reservoir: Service and Repair
Reservoir, Power Steering Pump - Installation
INSTALLATION
1. Install the reservoir (2) onto the coolant bottle (4) by sliding it into the guide and lock in place.
2. Install the return hose (1) on the reservoir hose fitting and securely tighten clamp.
3. Install the supply hose (3) on reservoir hose fitting and securely tighten clamp.
4. Install the air filter assembly and clean air tube See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair/Air Cleaner Body - Installation
5. Connect the negative battery cable (2).
6. Fill and bleed the power steering system See: Service and Repair/Steering - Power Steering System Bleeding