Challenger SRT-8 V8-6.1L (2009)
Reservoir/Service and Repair/Coolant Recovery Bottle - Installation
12. If installing right upper control arm, install the totally integrated power module (TIPM).See: Power and Ground Distribution/Power Distribution
Module/Service and Repair/Totally Integrated Power Module (TIPM) - Installation
Front Lower Control Arm - Removal
REMOVAL
1. Raise and support vehicle, See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
4. Remove screws (1) fastening stabilizer bar heat shield (3) on side of control arm repair.