Challenger SRT-8 V8-6.1L (2009)
TYPICAL FILL TUBE BOLTS
4. Loosely install the fill tube bolts (2).
5. Tighten the upper fill tube bolt to 39 Nm (29 ft.lbs.).
6. Tighten the lower fill tube bolt to 12 Nm (105 in.lbs.).
7. Install the water shield (1) and water shield bolts (2) (if equipped).
8. Tighten the water shield bolts to 12 Nm (9 ft.lbs).
9. Lower vehicle to check and fill transmission as necessary.