Charger V6-2.7L (2008)
Transmission Temperature Sensor/Switch: Service and Repair
Installation
INSTALLATION
1. Install the TRS (2) to the manual shaft. Make sure TRS locating pin rests in manual valve bore slot.
2. Install the TRS/manual shaft retaining screw (1) and torque to 5 Nm (45 in. lbs.) torque.
3. Install the manual shaft seal (1).
4. Install valve body to the transmission.See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/Installation