Charger V6-2.7L (2008)
21. Carefully lower the windshield onto the windshield fence. Guide the windshield and the rubber seal at the top the windshield into its proper
location.
CAUTION: It is not possible to move the windshield after installation. The windshield should never be pressed into place by more than
one person, because the windshield can break if pressed simultaneously on both sides.
22. Push the windshield inward until the windshield comes into contact with the spacers located on each side of the windshield fence (2).
23. Install the windshield side moldings.
24. Install the cowl grille See: Body and Frame/Cowl/Cowl Moulding / Trim.
25. Install the rear view mirror See: Body and Frame/Mirrors/Service and Repair/Rear View Mirror - Installation.
