Charger V6-2.7L VIN T (2007)
49. Tighten shock absorber lower mounting bolt nuts (4) to 72 Nm (53 ft. lbs.).
50. Tighten compression link bolt and nut (1) at crossmember to 85 Nm (63 ft. lbs.).
51. Perform wheel alignment, paying special attention to thrust angle. If rear crossmember needs to be shifted to align thrust angle, try to avoid
compromising tension link clearance.
Rear Mount
INSTALLATION
CAUTION: It is very important that bushing be installed in same position as original to maintain vehicle ride quality and bushing longevity.
That is why bushing, once installed, needs to closely match reference marks applied upon removal of original bushing.