Charger V6-2.7L VIN T (2007)
![background image](/dodge/charger/v6-2.7l_vin_t/Page-2900019.png)
4. Align the two spring clip retainers on the bezel with the slots in the quarter trim panel.
5. Using hand pressure, press firmly and evenly on the bezel over each of the spring clip locations until the retainers snap into place.
6. Install and tighten the screw into the cargo cover cradle formation of the quarter trim speaker bezel that secures the bezel to the quarter trim panel
on top of the rear wheel house. Tighten the screw to 2 Nm (15 in. lbs.).
Rear
Rear Door Panel
See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel
Rear Door Trim Panel
Rear Door Panel
See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel
Trunk Trim Panel - Removal
REMOVAL
1. Remove the four push-pin fasteners (1) that secure the trunk rear trim panel (2) to the inside of the deck opening lower panel (3).
2. Remove the trim panel from the vehicle.
Trunk Trim Panel - Installation
INSTALLATION