dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Controls - Speedometer Needle Fluctuation|Page 12305 > < Engine Controls - Speedometer Needle Fluctuation|Page 12299
Page 1
background image

Speedometer Head: All Technical Service Bulletins
Engine Controls - Speedometer Needle Fluctuation

NUMBER: 18-001-08

GROUP: Vehicle Performance

DATE: January 10, 2008

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 8.04 OR HIGHER FOR THIS BULLETIN.

StarMOBILE STANDALONE MODE OR StarMOBILE DESKTOP CLIENT MAY ALSO BE USED TO PERFORM THIS PROCEDURE.

SUBJECT:

Flash: Momentary Fluctuation Of The Speedometer Needle

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

2007 - 2008

(LX)

300 / Magnum / Charger

NOTE:

This bulletin applies to the above listed vehicles equipped with a 2.7L engine with a 42 RLE transmission (sales code EER and DGV) and standard
brakes (sales code BR8 or BRD) built before January 9, 2008 (MDH 0109XX).

SYMPTOM/CONDITION:

The vehicle operator may notice an infrequent condition described as the speedometer needle fluctuating despite the actual speed of the vehicle
remaining constant.

DIAGNOSIS:

Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as
designed. If DTC's are present record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the vehicle operator describes or experiences the Symptom/Condition, perform the Repair Procedure.

PARTS REQUIRED:

SPECIAL TOOLS / EQUIPMENT REQUIRED:

REPAIR PROCEDURE - USING THE INTERNET TO RETRIEVE THE FLASH FILE:

Engine Controls - Speedometer Needle Fluctuation|Page 12305 > < Engine Controls - Speedometer Needle Fluctuation|Page 12299