Charger V6-2.7L VIN T (2007)
rearward bolt is installed rear-to-front.
2. Install lower control arm mounting bolts and nuts (3 and 4). Do not tighten bolts at this time.
3. Raise steering gear to mounted position and install lower mounting bolts (2 and 3). Install upper mounting bolt (4) and nut. Tighten all mounting
bolts to 122 Nm (90 ft. lbs.).
4. Install heat shields (3) above both inner tie rod bellows (2). Tighten mounting screws to 7 Nm (62 in. lbs.).