Charger V6-3.5L (2009)
Antenna Amplifier: Service and Repair
Radio Antenna Module - Removal
REMOVAL
SEDAN
1. Disconnect and isolate the battery negative cable.
2. Remove C-pillar upper trim.
3. Disconnect wire harness connectors and antenna cable.
4. Remove mounting fasteners and antenna module.
WAGON
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Disconnect and isolate the battery negative cable.
2. Remove the liftgate trim.
3. Disconnect wire harness connectors and antenna cable.
4. Remove mounting fasteners and antenna module.