Charger V6-3.5L (2009)
Front Door Window Regulator: Service and Repair
Front Door Window Regulator - Removal
REMOVAL
1. Remove the trim panel from the inside of the front door. See: Front Door Panel/Service and Repair/Front Door Trim Panel - Removal.
2. Remove the speaker from the inside of the front door. See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Speaker/Service and Repair/Speaker - Removal.
3. Remove the watershield from the inside of the front door. See: Front Door Panel/Service and Repair/Front Door Watershield - Removal.
4. Remove the screw (3) that secures the bottom of the pull cup bracket (2) and the bottom of the window regulator rear rail to the inside of the front
door.
5. Loosen the screw (1) that secures the top of the pull cup bracket to the inside of the front door.
6. Disengage the upper pull cup bracket screw from the keyed hole and remove the bracket from the inside of the front door.
7. Using the regulator, adjust the front door glass (1) position up or down as required for access to the two window regulator glass clamps (3).
8. Loosen the screw (2) in each of the glass clamps far enough to release the glass.
9. Lift the glass out of the regulator clamps and into its full up position, then tape the glass securely into place.