Charger V6-3.5L (2009)
Rear Door Latch: Service and Repair
Rear Door Latch - Installation
INSTALLATION
NOTE: Wiring connector can be connected much easier with all links disconnected from latch and latch is unscrewed from door.
1. Connect the door wire harness connector (1) to the door latch (2).
2. Position the latch (3) to the latch face on the interior of the rear door shell (1).
3. Install and tighten the three screws (2) that secure the latch to the outer latch face of the rear door. Tighten the screws to 12 Nm (108 in. lbs.).
