Charger V6-3.5L (2009)
Door Lock Cylinder: Service and Repair
Door Lock Cylinder - Installation
INSTALLATION
NOTE: A door lock cylinder is used only on the driver side front door exterior handle.
1. Insert the lock cylinder (2) into the cavity on the back of the door handle (1).
2. Align the lock cylinder in the handle by engaging the tab (3) on the outer circumference of the cylinder in the slot of the tab (4) on the wall of the
handle cavity.
3. Reinstall the handle onto the outside of the driver side front door. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Handle/Front Door
Exterior Handle/Service and Repair/Front Exterior Handle - Installation.