Charger V6-3.5L (2009)
![background image](/dodge/charger/v6-3.5l/Page-3263001.png)
Seat Back: Service and Repair
Seat Back - Installation
INSTALLATION
1. Place seat belt into position and install the seat belt anchor nut. Tighten nut to 32 Nm (24 ft. lbs.).
2. Place the seat cushion into position and push downward on the forward edge of the seat cushion to lock into position. See: Seat Cover/Service and
Repair/Seat Cushion Cover - Removal
60/40 SEAT BACK - WAGON
60% SEAT BACK SIDE
1. With the 40% seat back removed.
2. Place 60% seat back (5) into position on the studs.
3. Fold the 60% section of the seat down.
4. Install the four nuts (6) attaching seat back (5). Tighten nuts to 57 Nm (42 ft. lbs.).
60/40 SEAT BACK - WAGON
40% SEAT BACK SIDE