Charger V6-3.5L (2009)
3. Using a drill motor, or other suitable device, rotate the adjuster cable strand (2) from the accelerator pedal end to position the brake pedal (1)
toward the full-forward position.
4. Rotate the adjuster cable strand until the brake pedal (4) gear drive block (1) lines up with the full-forward adjustment line (3) as shown. If
equipped, fine adjustments can be made by turning the adjustment knob (2) by hand to line up the components.
5. Reconnect the adjuster cable to the adjuster motor. If the cable resists connection, if equipped, turn the adjustment knob (2) by hand until the cable
drops into place. If not equipped with the adjustment knob, wiggle the cable around until the cable drops into place.
6. Verify proper operation of the adjustable pedals.