Charger V6-3.5L (2009)
1. Install mount to transmission bolts (2) and tighten to 47 Nm (35 ft.lbs.).
2. Install cross member (1) and attaching bolts. Tighten bolts to 68 Nm (50 ft.lbs.).
3. Lower transmission so cross member to mount bolts (2) can be started tightened by hand.
4. Lower transmission and remove jack.
5. Tighten mount bolts (2) to 47 Nm (39 ft.lbs.).
Insulator, Engine Mount
INSTALLATION
