Charger V6-3.5L (2009)
25. Install the right front drive axle (2).
26. Lower the vehicle.
27. Fill engine crankcase with the proper oil to the correct level .
28. Fill the cooling system See: Cooling System/Service and Repair.
29. Fill the power steering.
30. Connect the negative battery cable.
Oil Pan - RWD
RWD
1. Clean oil pan and all gasket surfaces.
2. Apply a 1/8 inch bead of Mopar(R) Engine RTV GEN II at the parting line of the oil pump housing and the rear seal retainer.