Charger V6-3.5L (2009)
10. Install the flex plate inspection cover (1) and tighten the fastener (2) to 11 Nm (97 in. lbs.).
11. Install the oil cooler (align the oil cooler notch to oil pan tab) See: Oil Cooler/Service and Repair/Engine Oil Cooler - Installation.
12. Install the engine oil filter. Tighten filter to 12 Nm (106 in. lbs.).
13. Install the steering gear to cradle bolts and tighten the fasteners to 70 Nm (95 ft. lbs.).
14. Connect the steering gear coupler and tighten the fastener to 30 Nm (22 ft. lbs.)
15. Attach the splash shield.
16. Lower the vehicle.
17. Install the engine oil indicator.
18. Fill engine crankcase with proper oil to correct level.
19. Connect negative battery cable.