Charger V6-3.5L (2009)
7. Install the throttle bracket (4). Tighten fasteners to 12 Nm (105 in. lbs.) at the throttle body and 28 Nm (259 in. lbs.) at the cylinder head.
8. Connect the harness connector to the electronic throttle control (5).
9. Connect the PCV hose (1), purge hose (2) and power brake booster vacuum hose (3) to the intake manifold.
10. Install the EGR tube (1), strut tower support, wiper module and cowl panel See: Powertrain Management/Emission Control Systems/Exhaust Gas
Recirculation/EGR Tube/Service and Repair/Exhaust Gas Recirculation (EGR) Tube - Installation.
