Charger V6-3.5L (2009)
CAUTION: The throttle body must be torqued in a mandatory torque sequence. Tighten in a criss - cross pattern to specification.
3. Tighten the bolts in a mandatory torque criss - cross pattern sequence to 5.5 Nm (50 in. lbs.).
4. Install the throttle body support bracket to the bottom of the throttle body. Tighten the bolts to 27 Nm (20 ft. lbs.).
5. Install inlet hose and tighten clamp.
6. Connect negative cable to battery.
7. Use a scan tool and perform the ETC RELEARN function.