Charger V6-3.5L (2009)
-
Replace and program the Powertrain Control Module (PCM).
-
Perform the PCM VERIFICATION TEST. See: Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures/Verification Tests/PCM Verification Test.
7. SPARK PLUG(S)
1. Turn the ignition off.
2. Remove the spark plug.
3. Inspect the spark plug for any of the following conditions:
-
Cracks or damage
-
Carbon tracking
-
Foreign material
-
Gap not within specification
-
Loose or broken electrode
NOTE: Lightly tap the bottom of the spark plug on a solid surface. The electrode in the spark plug should not move.
Were any problems found?
Yes
-
Replace the spark plug.
-
Perform the PCM VERIFICATION TEST. See: Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures/Verification Tests/PCM Verification Test.
No
-
Test Complete.