Charger V6-3.5L (2009)
![background image](/dodge/charger/v6-3.5l/Page-2649004.png)
4. Install the screws (1) that secure the curtain airbag to the spring nuts in the roof side rail. Torque screws to 5 Nm (44 in. lbs.).
5. Connect the curtain airbag squib connector (2) to the inflator (3).
6. Install the headliner into the vehicle See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Installation.
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE
SYSTEM TEST IS NOT PERFORMED FIRST. FOR THE SYSTEM TEST, See: Powertrain Management/Computers and Control Systems/Testing
and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Supplemental Restraints Verification Test
Driver Air Bag - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service.