Charger V6-3.5L (2009)
8. Remove screws (1) fastening routing clamps securing return hose (3) to right side of engine cradle (2).
9. Remove return hose from vehicle.
RWD
GEAR TO COOLER - RWD
1. Disconnect and isolate battery negative cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
4. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal