Charger V6-3.5L (2009)
Tie Rod End: Service and Repair
Tie Rod End - Removal
Inner Tie Rod
INNER TIE ROD
1. Remove outer tie rod. See:
2. Remove tie rod jam nut from inner tie rod.
NOTE: If equipped with All-Wheel-Drive, it may be necessary to remove heat shield (3) above inner tie rod bellows (2) to allow better access
to bellows clamp.
3. Remove clamp (1) securing bellows (3) to inner tie rod.
4. Remove clamp (2) securing bellows (3) to steering gear body.
5. Remove bellows (3).