Charger V6-3.5L (2009)
![background image](/dodge/charger/v6-3.5l/Page-1727025.png)
3. Install dual retainer plate (2) using Remover/Installer 6301 (1).
4. Verify that all retainers (1, 2) are installed as shown. Retainers should be flush or below valve body surface.
3. Install dual retainer plate (2) using Remover/Installer 6301 (1).
4. Verify that all retainers (1, 2) are installed as shown. Retainers should be flush or below valve body surface.