Charger V6-3.6L (2011)
Cabin Air Filter: Service and Repair
Particulate Air Filter - Installation
INSTALLATION
NOTE: The particulate air filter is labeled with "REAR OF VEHICLE" and an arrow to indicate air flow direction through the filter. Make
sure to properly install the particulate air filter. Failure to properly install the filter will result in the need to replace the filter sooner
than required by design.
NOTE: LHD model shown in illustrations. RHD model similar.
1. Install the particulate air filter (1) into the particulate air filter housing (2) located inside of the dash panel plenum (3). Insert the particulate air
filter down directly into the filter housing with the arrow (4) on the filter pointing to the rear of the vehicle. The particulate air filter is held in place
by friction between the filter element and the filter housing, so no fasteners are required.
2. Close the filter door (3) on the top of the particulate air filter housing (4) located inside of the dash panel plenum (5).
3. Install the air inlet grille (1) onto the wiper module screen (2).