Charger V8-5.7L (2008)
16. Install outer tie rod (2) end nut (1) at each knuckle (3). Tighten end nut to 86 Nm (63 ft. lbs.).
17. Install tire and wheel assembly (1). See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation.
18. Lower vehicle from hoist.
19. Install power steering fluid into pump reservoir. See: Maintenance/Fluids/Power Steering Fluid/Testing and Inspection
20. Connect negative battery cable (2) to battery post.See: Starting and Charging/Battery/Service and Repair/Procedures/Battery Reconnection
21. Perform vehicle alignment. See: Maintenance/Alignment/Service and Repair