Charger V8-5.7L (2008)
11. Install the three push-pin retainers (1) that secure the trim panel to the inside of the door. See: Doors, Hood and Trunk/Doors/Front
Door/Description and Operation.
12. Install and tighten the four screws (6) that secure the bottom and front lower corner of the trim panel to the inside of the door. Tighten the screws
to 2 Nm (16 in. lbs.).
NOTE: For vehicles equipped with the optional Automatic Express Up power window feature, calibration of this feature is required
whenever power to the door module is disrupted.A battery reconnect procedure must be performed anytime the battery has been
disconnected. See: Starting and Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
13. Reconnect the battery negative cable.