dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Cowl Trim|Page 10823 > < Cowl Trim|Page 10821
Page 10
background image

3. Engage the base of the A-pillar trim (1) to the end of the instrument panel top cover.
4. Align the two spring clip retainers on the trim with the slots in the inner A-pillar (3).
5. Using hand pressure, press firmly and evenly forward on the trim over each of the spring clip locations until the retainers snap into place.

Removal

LOWER

1. Loosen the front door sill portion of the lower cowl trim at the rear of the front door opening for access to the forward lower B-pillar trim screw. 

See: Cowl Trim/Cowl Trim - Removal.

2. Loosen the front of the scuff plate trim from the rear door sill for access to the rearward lower B-pillar trim screw. See: Scuff Plate/Service and

Repair/Door Sill Scuff Plate/Door Sill Scuff Plate - Removal.

3. Move aside the seat belt webbing to access and remove the two screws (2) that secure the upper end of the lower B-pillar trim (3) to the inside of

the B-pillar (1).

4. Remove the two screws (4) that secure the lower end of the B-pillar trim to the front and rear door sills.
5. Disengage the seat belt webbing from the slot in the upper end of the lower B-pillar trim through the slit in the trim and remove the trim from the

inside of the B-pillar.

Installation

LOWER

1. Engage the seat belt webbing through the slit and into the slot in the upper end of the lower B-pillar trim (3) and position the trim to the inside of

the B-pillar (1). Be certain the webbing is not twisted.

2. Press fit the lower end of the lower B-pillar trim to the front and rear door opening sills.
3. Install and tighten the two screws (4) that secure the lower end of the B-pillar trim to the front and rear door sills. Tighten the screws to 2 Nm (22

in. lbs.).

4. Move aside the seat belt webbing to install and tighten the two screws (2) that secure the upper end of the lower B-pillar trim to the inside of the

B-pillar. Tighten the screws to 2 Nm (22 in. lbs.).

5. Reinstall the scuff plate trim onto the rear door sill. See: Scuff Plate/Service and Repair/Door Sill Scuff Plate/Door Sill Scuff Plate - Installation.
6. Reinstall the lower cowl trim onto the front door opening sill. See: Cowl Trim/Cowl Trim - Installation.

Removal

Cowl Trim|Page 10823 > < Cowl Trim|Page 10821