Charger V8-5.7L (2008)
1. Apply masking tape to the deck lid around the perimeter of the spoiler to protect the deck lid paint during the spoiler removal process.
2. Make several knots spaced about 1 inch apart near the middle of a 3-4 ft. length of monofilament fishing line.
3. Use the knotted monofilament to saw through the tape and remove the spoiler without damaging it or the deck lid surface.
4. All tape/residue must be completely removed from the deck lid surface. Use a 3M(TM) Stripe-Off Wheel (Part Nos. 07498 or 07499, which are
solid wheels) to remove the tape/residue without damaging the vehicle surface.
5. The following technique is necessary for the removal Stripe-Off Wheel to work with the 3M(TM) Acrylic Plus Tape: The wheel must rotate and be
applied to the tape so that the wheel is providing a lifting or peeling action to the tape this will help to prevent smearing of the tape.
6. After removal of the tape/residue with the wheel, use 3M(TM) Prep Solvent-70 (Part No. 08973) as a cleaning wipe. Then wipe with isopropyl
(rubbing) alcohol and dry with a clean, lint-free cloth.
7. Remove the masking tape from the deck lid.
8. All tape/residue must also be removed from the spoiler, this can be accomplished with the 3M(TM) Stripe-Off Wheel, using caution not to gouge
the backside of spoiler.