Charger V8-5.7L (2008)
5. Remove any clips (2) retaining brake rotor (3) to wheel mounting studs.
6. Slide brake rotor (3) off hub and bearing (1).
Front - SRT8
FRONT - SRT8
NOTE: Before proceeding, See: Service Precautions/Brakes - Caution.
1. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
CAUTION: When pushing pistons back into caliper bores, use only a trim stick as shown or other suitable soft tool. Never use a
screwdriver or other metal pry bar due to potential damage to braking surface of rotor, caliper, pistons or dust boots.