Charger V8-5.7L (2008)
9. Install the front differential through the opening at the rear of the cradle, and attach to the oil pan..
10. Fasten the differential (4) to the oil pan (3) Torque to 65 Nm (48 ft. lbs).
11. Install the differential support bracket (1) to the differential and the engine block.
12. Install the left (2) and right front drive axles. . See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair
13. Install front drive shaft into the differential and transfer case. See: Transmission and Drivetrain/Drive/Propeller Shafts, Bearings and
Joints/Drive/Propeller Shaft/Service and Repair
14. Install the engine oil dipstick and tube.