Charger V8-5.7L (2008)
Front Crankshaft Seal: Service and Repair
Removal
REMOVAL
1. Disconnect negative cable from battery.
2. Remove accessory drive belt . See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and Replacement
3. Drain cooling system . See: Cooling System/Service and Repair
4. Remove upper radiator hose.
5. Remove radiator shroud attaching fasteners.
6. Remove radiator cooling fan and shroud . See: Cooling System/Radiator Cooling Fan/Service and Repair
7. Remove crankshaft damper bolt.
8. Remove damper using Crankshaft insert 8513A (2) and Three Jaw Puller 1023 (1) See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft
Pulley/Service and Repair/Vibration Damper - Removal.
9. Using Crankshaft Front Seal Remover 9071 (1), remove crankshaft front seal (2).
