Charger V8-5.7L (2008)
Underhood Lamp: Service and Repair
Underhood Lamp - Police
Removal
REMOVAL
1. Open hood, disconnect and isolate the battery negative remote terminal or pull fuse in the PDC.
2. Insert a small flat blade in access slot between the lamp base (1) and lamp lens (2).
3. Lift the lamp lens (2) upward and remove the lamp lens (2).
4. Depress bulb terminal (2) inward to release bulb (1).
Installation
INSTALLATION
1. Engage the replacement bulb wire loop (3) to terminal closest to lamp base (4) wire connector.
