Charger V8-5.7L (2008)
Accelerator Pedal: Service and Repair
Accelerator Pedal - Installation
INSTALLATION
1. Install pedal assembly to mounting studs.
2. Install nuts.
3. Tighten mounting nuts to 34 Nm (25 ft. lbs.).
4. Connect electrical connector to assembly, if equipped with adjustable pedals perform the Synchronization of brake pedal to accelerator pedal.
5. Connect negative battery cable.
6. Synchronize brake pedal to accelerator pedal, then connect adjuster cable (1) to adjuster motor (2). See: Accessories and Optional
Equipment/Pedal Positioning System/Service and Repair/Procedures.