dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Relays and Modules - Cooling System > < Electronic Brake Control Module|Removal|Page 198
Page 4
background image

11. Connect battery negative cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and

Repair/Procedures/Battery Reconnection

12. Perform Diagnostic Verification Test and clear any faults. See: Powertrain Management/Computers and Control Systems/Testing and

Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests

Relays and Modules - Cooling System > < Electronic Brake Control Module|Removal|Page 198