Charger V8-5.7L (2008)
7. Remove the three screws (1) at the bottom of the SCCM shroud for the multi-function switch and Steering Control Module (SCM).
8. Separate the multi-function switch from the SCM.
Assembly
ASSEMBLY
WARNING: To service any component of the SCCM, the entire assembly must be removed from the column. This must be done due to the
clockspring passing through the assembly and into the self docking connector. Failure to remove the assembly could damage the pins of the
clockspring and prevent the airbag system from operating properly.
1. Position the Steering Control Module (SCM) onto the multi-function switch.