dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Accessories and Optional Equipment > < Seat Sensor/Switch|Removal|Page 9405
Page 3
background image

4. Install the adjuster to riser mounting bolt (3). Torque nuts to 45 Nm (33 ft. lbs.). For additional information See: Body and Frame/Seats/Service

and Repair/Seat Riser - Installation.

5. Install the front passenger seat bolts See: Body and Frame/Seats/Service and Repair/Seat - Installation.

WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.

WARNING: Following successful completion of the Airbag System test procedure, the Occupant Classification System Verification Test must
be done using a scan tool and the appropriate diagnostic information.

Accessories and Optional Equipment > < Seat Sensor/Switch|Removal|Page 9405