Charger V8-5.7L (2008)
Integrated Accessory Switch Assembly: Service and Repair
Instrument Panel Switch Pod - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component
service. Failure to do so may result in accidental airbag deployment, personal injury or death.
3. Remove the instrument panel center bezel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Center Bezel - Removal.
4. Remove the two screws (1) from the rear of the switch pod.
5. Separate switch from center bezel.