Charger V8-5.7L (2008)
Remote Switch: Service and Repair
Removal
REMOVAL
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
1. Disconnect and isolate the battery negative cable.
2. Remove the driver airbag See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Airbag - Removal.
3. Using a trim stick, gently pry switch from steering wheel at locations shown.
4. Disconnect electrical connector.
5. Remove switch from steering wheel.