Charger V8-5.7L (2008)
6. Connect battery negative cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection
7. Fill and bleed power steering system. See: Power Steering Bleeding/Service and Repair
Power Steering Fluid Cooler - SRT8/Police Package
FLUID COOLER - SRT8/POLICE PACKAGE
1. Install center tube of cooler over mounting clips attached to cooling module. Push cooler past clip retaining tabs allowing it to lock into place.
2. Slide return hose to reservoir (3) onto outlet of cooler (2). Install clamp (4) securing hose in place.
3. Slide return hose from gear (5) onto inlet of cooler (2). Install clamp (1) securing hose in place.
4. Install belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Installation
5. Lower vehicle.